“D” Series

Dairy Hot Water Heaters

The Wilson "D" Series Dairy Water Heater is available with or without attached header tank.

If installed with a separate header tank, the aximum head pressure which is measured from the base of the storage unit to the top of the open vent pipe, must not exceed 6 metres. Both models are available in a variety of sizes and all are fitted with main and booster elements. The booster element is used to restore heat lost between the morning and evening milking and can either be turned on and off manually or controlled by a time switch (Check with your electrical contractor).

Element sizes are based on an 8-hour heating cycle, but can be varied on request to suit supply authorities.

For full details, download the data sheet.